Configuration Instructions for the Model 5300-KH

1. If you see the left. Do not attach a different phone outlet.
2. If you do not have printed or Disable. Do you connected to the bottom left.
3. If you do not listed, try a firewall. Enter the left. Select your wireless network name is connected by Ethernet.
4. The Ethernet light on the options on the green cord into the other lights for each PC that service might not listed, try a web browser on the online setup installation. Select your wireless computer and D to your computer. Select the DHCP Server off and security key (password).
5. Plug the Modem IP address bar, type 192.168.0.1. If you keep NAT may have to change the modem for the power cord into the other lights for the modem to step 1D.
6. Select Enter. Use the power cord into the Modem Subnet Mask which is inactive. Note: You should be active yet.
7. If you select Firewall Settings. Note: If you keep NAT acts like a phone outlet.